Not all electrical problems in your home or business require the services of an electrician. Even when things go wrong, it’s always good to know what you’re dealing with so you can respond appropriately to the situation. Some electrical problems are caused by human error and can be quickly avoided and fixed by following general electrical safety tips and considering a few factors before attempting any electrical work.
On the other hand, blackouts occur when electrical wiring is faulty or incorrect, over time, or due to changes in environmental factors such as humidity. Whenever the power goes out in your home or office, it could be due to a faulty switchboard. So start by checking the consumer unit or switchboard, which contains the two pole breakers and terminals.
Things to Remember When Doing Your Own Electrical Troubleshooting
When you have an electrical problem in your home or office building, your first instinct may be to quickly replace or relocate electrical components, but it’s important that you first understand the root cause of the problem. You can perform electrical troubleshooting yourself by following these steps:
Never proceed to fix an unknown electrical problem
If you encounter an electrical problem you are not familiar with, remember not to touch anything that you think is appropriate, and call trusted electricians such as Arrowtech electrical and plumbing services immediately. In many cases, people have attempted to repair and replace them themselves, only to end up seriously injured or even killed.
Determine if the problem is external or internal
It is important to determine whether the electrical problem at hand is internal or external. Sometimes these problems can be caused by external errors. If this is the case, contact your electrical contractor as soon as possible, especially if electrical troubleshooting itself doesn’t help. However, if the problem is due to an internal error, it is best to call in a professional electrical engineer to fix it.
Never forget to turn off the device when troubleshooting
The first thing you should do before starting to troubleshoot any electrical system is to turn off the power switch on the main electrical panel. When troubleshooting electrical problems, put your safety first. Once done, you can turn the power back on. Forgetting this step can be potentially dangerous. So if you’re not sure how to determine the source of your problem, simply contact electrical service from a certified electrician.
Test and repair or replace as necessary
When troubleshooting an electrical system, it’s important to first identify the problem. Most of the time, a dead outlet or a flickering light bulb will cause a broken circuit breaker. There may be other reasons behind this. Try reconnecting the faulty socket or putting in a new bulb and see if that helps.
Never ignore recurring problems
If your home is already experiencing recurring electrical issues and after troubleshooting the electrical system you are unable to fix it yourself, it may be time to call in a trusted professional electrician such as Arrowtech electrical and plumbing services. In some cases, people have even had to rewire the entire house if the electrical problem persisted. Ignoring electrical problems for long periods of time can not only endanger you but can also damage your electronic equipment.
Please investigate
Although you may have heard it before, whenever you need information on an electrical issue, the internet is at your fingertips. For the layman, electrical troubleshooting has definitely become more feasible. Just look for the signs of your electrical problems and you may find many solutions. Remember to only trust content from reliable electricity companies, as there are several important safety measures that should be taken.
When should I call in an electrician for troubleshooting services?
Common wisdom in residential and commercial areas is that your first concern should be to determine the root cause of electrical problems. Most of the time, problems like this are due to improper electrical installation. This often happens when you use the services of a non-professional electrician. Be sure to invest in quality work and only hire certified electricians who know exactly what they are doing. This will help you avoid electrical repairs and replacements in the future.
Most electrical problems should always be checked by an experienced electrician. Getting involved in such issues can exacerbate the problem and cause more costs in the future. Make sure you know which electrical problems require the skills of an electrician by reviewing the following:
Flickering Lights: Are you experiencing flickering lights in your home? Your wires may be badly connected. Such problems are often referred to as “faults” or “short circuits”. Such issues require the expertise and skills of a licensed electrical contractor. They will be able to meet your needs as efficiently as possible. Otherwise, if the wiring isn’t the problem, you can try replacing the bulb yourself.
Malfunction/damaged outlet: Sometimes in your home, a plug may fall out of an outlet during use. This could be the result of an old electrical wiring system that needs to be updated. If so, remember you shouldn’t be rewiring it yourself. Electrical work like this requires the expertise of a licensed electrical contractor like Arrowtech electrical and plumbing services. We pride ourselves on providing high-quality electrical services that are executed efficiently.
Continuous or Repeated Breaker Trips: Does your breaker keep tripping after you reset it? Then the problem might be with the wires. If not, some high-powered electrical appliances may be causing the problem. If the problem persists, please contact a professional electrical service person immediately. An electrician can fix the problem properly.
Outdated electrical wiring: Outdated electrical wiring is considered one of the leading causes of common electrical problems in the home. If your wiring is outdated, it’s time to replace it. Older homes often have aluminum buttons and plumbing. Contact a reliable electrician for replacement as soon as possible to avoid danger.
Circuit Breaker humming: As soon as you hear any buzzing from your circuit breaker, call a trusted electrical contractor immediately to investigate the problem. Don’t put this problem off, as the buzzing or humming could indicate a larger electrical problem that needs immediate attention.
Troubleshooting Common Electrical Switching Problems
Like any other electrical component, electrical switches encounter problems. In such cases, do not hesitate to call a professional and certified electrician to resolve the issue. Some solutions may even involve operating a trigger switch, requiring the skills of an experienced technician.
Not sure how to identify an electrical problem? Check out some common electrical switch problems below to familiarize yourself with the problem before the electrician arrives.
Blinking Lights
If you encounter flickering light fixtures in your home, remember to have them checked or replaced as soon as possible. You can easily fix the problem without the help of a professional electrician, but don’t forget that this can only be done if you are already familiar with electrical installations. There are several possible causes of this problem, one of which could be loose wiring, and another could be a bad bulb. If you know you buy the exact model, you can quickly swap out new bulbs. However, if that doesn’t work, call a licensed electrician right away to troubleshoot and ultimately fix the problem.
Broken wire device
Have you ever flipped an appliance switch only to find that your light fixture or appliance isn’t working? Have you ever tried to turn on the water heater and found that there is no hot water coming out of your shower? There could be a number of reasons behind these issues, but the main problem could be behind your wires. Another cause could be that your bulb has completely burned out, which is more likely to happen if you’re using unreliable CFLs. A short circuit can also be the cause of an electrical switch not working properly.
The electrical switch is hot when in use
Water heater switches and wall switches can get hot with regular use. This condition involves overloading, where it carries more power than it can handle. As with the other problems discussed above, electrical switches can also be hot to the touch due to miss-wiring. If the problem appears to endanger the safety of your family, immediately contact a professional electrician to repair the power switch, as this type of problem requires immediate attention.
Common electrical problems in the home
Before attempting any troubleshooting yourself, it’s important that you can identify common household electrical problems such as:
Overloading – This happens when a particular device is plugged into a lower-powered outlet. Always make sure that the wattage of a light bulb or other lower-powered within the wattage range of the outlet.
Power Surges – Power surges can happen for a variety of reasons. This includes everything from defective equipment to poorly laid wiring to lightning strikes.
Electric Shock – Electric shock usually happens when you turn an appliance on or off. Although the cause could be equipment or wiring, be sure to contact Arrowtech electrical and plumbing services immediately.
High Electricity Bills – Have you noticed a sudden increase in your electricity bills? This could be due to damaged wiring or circuitry.
Flickering Lights – This common household problem usually occurs when a wire becomes loose.
Circuit Breakers tripping constantly – High-powered equipment often causes circuit breakers to trip and often results in blackouts. Although this is common, be sure to call a certified electrician from Arrowtech electrical and plumbing services to resolve the issue.
Bulb burnt out – Have you ever found yourself buying a new light bulb only to burn out minutes after plugging it in? There are several reasons for this problem. The bulb may be high wattage, the circuit and power supply may be badly wired, or the insulator may be close to the bulb.
Do you have more than one of the above electrical problems? Contact Arrowtech electrical and plumbing services at 0714445566.
